Passer au contenu

/ Research

Je donne

Rechercher

Natural Sciences and Engineering; Health Sciences; Medical Sciences

Houman Savoji

Professeur sous octroi adjoint

Faculté de médecine - Département de pharmacologie et physiologie

houman.savoji@umontreal.ca

Profile

Research expertise

Nous combinons les technologies de fabrication avancée (la micro- et la nano- fabrication, la bio-impression 3D, la technologie de microfluides, l'electrofilage de cellules) avec des matériaux fonctionnels et composites pour des applications en génie tissulaire, médecine régénérative et organes sur puces.

  • Bioingénierie
  • Génie tissulaire
  • Médecine régénérative
  • Biomatériaux
  • Micro- et nano-fabrication
  • Bio-impression 3D
  • Organes sur puces

Biography

Dr Houman Savoji est professeur-chercheur adjoint au Département de pharmacologie et physiologie de l’Université de Montréal. Il est également chercheur à temps plein au Centre de recherche du CHU Sainte-Justine et investigateur principal en médecine régénérative, organes sur puces et bio-impression à TransMedTech.

Il a obtenu son doctorat en génie biomédical à l’Institut de génie biomédical de Polytechnique Montréal en 2016. Ensuite, il a fait un stage postdoctoral à l’Institut des biomatériaux et de génie biomédical de l’Université de Toronto.

Dr Savoji a été récipiendaire de plusieurs bourses et prix prestigieux au cours de ses études supérieures et postdoctorales, dont : une bourse postdoctorale des IRSC, une bourse postdoctorale du FRQNT (1er rang), le "Human Society of International Grant", le prix étudiants-chercheurs étoiles du FRQNT, une bourse doctorale d’excellence du FRQNT, et un prix "Jane and Frank Warchol Fund of the Society of Vacuum Coaters (SVC) Foundation".

Il a été profondément impliqué dans plusieurs projets de recherche et il a publié de nombreux articles dans des revues à comités de lecture. Il a aussi rédigé plusieurs rapports techniques qui ont été soumis à des bureaux du gouvernement. De plus, il a présenté ses recherches dans des conférences nationales et internationales dans différents pays.

Son champ d’intérêt de recherche principal est la fabrication avancée, particulièrement la micro- et la nano-fabrication de biomatériaux fonctionnels pour des applications en génie tissulaire et médecine régénérative.

Ses recherches sont principalement liées à la conception, au développement, à l’optimisation, à l’implantation et à la caractérisation de biomatériaux fonctionnels novateurs en utilisant des technologies d’ingénierie émergentes, telles que les technologies de la bio-impression 3D, de microfluides et de l’électrofilage. Les biomatériaux fonctionnels sont parmi les plus demandés sur le marché en lien avec l’ingénierie et la médecine.

Awards and recognitions

  • 2017-2020, Bourse de recherche postdoctorale, IRSC
  • 2017-2019, Bourse de recherche postdoctorale, FRQNT
  • 2017-2018, Human Society of International Grant, Human Toxicity Assessment Project
  • 2016, Prix du Centre de recherche du Centre hospitalier de l'Université de Montréal (CR-CHUM)
  • 2015, Prix étudiants-chercheurs étoiles, FRQNT
  • 2014-2015, Jane and Frank Warchol Fellowship, Society of Vacuum Coaters Foundation
  • 2013, Institute of Textile Science Award 
  • 2012-2015, Bourse doctorale d'excellence pour étudiants étrangers, FRQNT

Affiliations and responsabilities

Research affiliations

Teaching and supervision Currently recruiting

Recruitment in research Currently recruiting

Bioprinting of Cardiac Tissues - PhD Student in Savoji Research Group


Savoji Laboratory within the Department of Pharmacology and Physiology and Institute of Biomedical Engineering of the Faculty of Medicine of the University of Montreal, the Research Center of the CHU Sainte-Justine (CHUSJ), and the TransMedTech Institute is seeking creative PhD students to join our multidisciplinary research group. Successful applicants should have hands-on experience in 3D bioprinting, designing, fabricating tissue engineered platforms.


Duties and Responsibilities:
You will work on an interdisciplinary project involving 3D bioprinting using stem-cell derived human cardiac cells to fabricate functional cardiac tissues. Successful candidates are expected to participate in writing research proposals, reports, presentations, and publications, etc.


Qualifications:
Required:
- M.Sc. in biomedical engineering, chemical engineering, materials science, mechanical engineering or a related discipline.
- Must demonstrate theoretical and practical knowledge within the fields of bioengineering, tissue engineering, or cell biology.
- Scientific track record demonstrating well-organized design and execution of research.
- Ability to work independently and in a collaborative team.
- Strong communication skills.


Preferred:
- Understanding of cell biology and/or tissue engineering.
- Cell culture experience.
- Experience with in vitro assays including cell viability, toxicity, etc.
- Experience working with induced pluripotent stem cells.
- 3D (bio)printing experience.
- Experience with flow cytometry, ELISAs, PCR, or confocal microscopy.
- Experience with in vivo experiments.


Please send your application as a single PDF file to Prof. Houman Savoji (houman.savoji@umontreal.ca) using the subject line “Savoji Lab PhD Student Application.”

Bioprinting of Cardiac Tissues – Postdoctoral Fellow in Savoji Research Group

Savoji Laboratory within the Department of Pharmacology and Physiology and Institute of Biomedical Engineering of the Faculty of Medicine of the University of Montreal, the Research Center of the CHU Sainte-Justine (CHUSJ), and the TransMedTech Institute is seeking creative Postdoctoral Fellow to join our multidisciplinary research group. Successful applicants should have hands-on experience in 3D bioprinting, designing, fabricating tissue engineered platforms.

Duties and Responsibilities:

You will work on an interdisciplinary project involving 3D bioprinting using stem-cell derived human cardiac cells to fabricate functional cardiac tissues. Successful candidates are expected to participate in writing research proposals, reports, presentations, and publications, etc.

Qualifications:

Required:

  • Ph.D. in biomedical engineering, chemical engineering, materials science, mechanical engineering or a related discipline.
  • Must demonstrate theoretical and practical knowledge within the fields of bioengineering, tissue engineering, or cell biology.
  • Scientific track record demonstrating well-organized design and execution of research.
  • Ability to work independently and in a collaborative team.
  • Strong communication skills.
  • Understanding of cell biology and/or tissue engineering.
  • Cell culture experience.
  • Experience with in vitro assays including cell viability, toxicity, etc.
  • Experience working with induced pluripotent stem cells.
  • 3D (bio)printing experience.
  • Experience with flow cytometry, ELISAs, PCR, or confocal microscopy.
  • Experience with in vivo experiments.

Please send your application as a single PDF file including a complete resume, cover letter describing research interests and goals, full list of publications, as well as the names and contact information of three references. Applications should be sent to Prof. Houman Savoji ( houman.savoji@umontreal.ca ) using the subject line “Savoji Lab PhD Postdoctoral Fellow Application.”

Teaching

Student supervision

Theses and dissertation supervision (Papyrus Institutional Repository)

Projects

Research projects

2023 - 2030

Modelling cell dynamics and epigenetic changes in 3D spheroids with custom-made hydrogels

Lead researcher : Noël J-M Raynal
Co-researchers : May Griffith , Morgan Craig , Houman Savoji
Funding sources: IRSC/Instituts de recherche en santé du Canada
Grant programs: PVXXXXXX-(PJT) Subvention Projet
2024 - 2028

2024-NOVA-345980

Lead researcher : Houman Savoji
Co-researchers : Lyes Kadem , Craig Simmons
Funding sources: FRQNT/Fonds de recherche du Québec - Nature et technologies (FQRNT)
Grant programs: PVXXXXXX-Programme NOVA pour chercheur(e)s de la relève (partenariat avec CRSNG)
2023 - 2028

Centre de Recherche sur les Systemes Polymeres et Composites Haute Performance_CREPEC / Research Center for High Performance Polymer and Composite Systems (2022-2028)

Lead researcher : Pascal Hubert
Co-researchers : Houman Savoji
Funding sources: FRQNT/Fonds de recherche du Québec - Nature et technologies (FQRNT)
Grant programs: PVXXXXXX-(RS) Programme de regroupements stratégiques
2021 - 2027

3D Bioprinting of Cardiac Tissues

Lead researcher : Houman Savoji
Funding sources: CRSNG/Conseil de recherches en sciences naturelles et génie du Canada (CRSNG)
Grant programs: PVXXXXXX-(DGECR) Tremplin vers la découverte
2021 - 2027

3D Bioprinting of Cardiac Tissues

Lead researcher : Houman Savoji
Funding sources: CRSNG/Conseil de recherches en sciences naturelles et génie du Canada (CRSNG)
Grant programs: PVX20965-(RGP) Programme de subvention à la découverte individuelle ou de groupe
2022 - 2026

Bioimpression 3D de tissus cardiaques pour la transplantation, les applications de découverte et de criblage de médicaments

Lead researcher : Houman Savoji
Funding sources: FRQS/Fonds de recherche du Québec - Santé (FRSQ)
Grant programs: PVXXXXXX-Bourse de chercheur-boursier : Junior 1
2022 - 2026

Bioimpression 3D de tissus cardiaques pour la transplantation, les applications de découverte et de criblage de médicaments

Funding sources: FRQS/Fonds de recherche du Québec - Santé (FRSQ)
Grant programs: PVXXXXXX-Établissement de jeunes chercheurs Juniors 1
2022 - 2026

Bioimpression 3D de tissus cardiaques pour la transplantation, les applications de découverte et de criblage de médicaments

Lead researcher : Houman Savoji
Funding sources: FRQS/Fonds de recherche du Québec - Santé (FRSQ)
Grant programs: PVXXXXXX-Établissement de jeunes chercheurs Juniors 1
2023 - 2025

Bio-impression 3D in situ de bio-encres ostéo-inductives et conductrices pour la reconstruction de défauts osseux

Lead researcher : Houman Savoji
Funding sources: FRQNT/Fonds de recherche du Québec - Nature et technologies (FQRNT)
Grant programs: PVXXXXXX-Programme de collaboration de recherche CNRST FRQ (Maroc-Québec)
2022 - 2024

Sound-Induced 3D Biofabrication and Morphogenesis

Lead researcher : Houman Savoji
Funding sources: CRSNG/Conseil de recherches en sciences naturelles et génie du Canada (CRSNG)
Grant programs: PVXXXXXX-(OIR) Outils et d'instruments de recherche (de 7 001 $ à 150 000 $)
2022 - 2023

Réseau de thérapie cellulaire, tissulaire et génique du Québec - ThéCell / Développement d'un oesophage artificiel à l'aide de cellules souches induites de patients iPS

Lead researcher : Corinne Hoesli
Co-researchers : Christophe Faure , Houman Savoji
Funding sources: FRQS/Fonds de recherche du Québec - Santé (FRSQ)
Grant programs: PVXXXXXX-Réseaux thématiques de recherche
2022 - 2023

Développement d’une technologie biomimétique révolutionnaire pour les caractérisations non-invasives multiéchelles de tissus mous bio-imprimés en 3D

Lead researcher : Houman Savoji
Co-researchers : Dieter Reinhardt
Funding sources: FRQSC/Fonds de recherche du Québec - Société et culture (FQRSC)
Grant programs: PVXXXXXX-AUDACE (financement partagé entre les fonds de recherche du Québec)
2022

3D scaffolds for organoid growth

Co-researchers : Noël J-M Raynal , Houman Savoji
Funding sources: SPIIE/Secrétariat des programmes interorganismes à l’intention des établissements
Grant programs: PVXXXXXX-Fonds d'excellence en recherche Apogée Canada
2020 - 2022

3D Bioprinting of Cardiac Tissues.

Lead researcher : Houman Savoji
Funding sources: SPIIE/Secrétariat des programmes interorganismes à l’intention des établissements
Grant programs: PVXXXXXX-Fonds d'excellence en recherche Apogée Canada
2020 - 2022

Fonds de démarrage

Lead researcher : Houman Savoji
Funding sources: Fondation de l'Hôpital Ste-Justine
Grant programs:
2020 - 2021

Institut TransMedTech - 3D Bioprinting of Cardiac Tissus

Lead researcher : Carl-Éric Aubin
Co-researchers : Houman Savoji
Funding sources: SPIIE/Secrétariat des programmes interorganismes à l’intention des établissements
Grant programs: PVXXXXXX-Fonds d'excellence en recherche Apogée Canada

Outreach

Publications and presentations

Publications

Publications choisies

  1. Savoji H, Davenport Huyer L, Mohammadi MH, Lai BFL, Rafatian N, Bannerman D, Shoaib M, Bobicki E, Ramachandran A, Radisic M, 3D Printing of Vascular Tubes Using Bioelastomer Prepolymers by Freeform Reversible Embedding, ACS Biomaterials Science & Engineering, 2020, https://doi.org/10.1021/acsbiomaterials.9b00676.
  2. Zhao Y, Rafatian N, Wang EY, Lai BF, Wu Q, Lu RX, Savoji H, Radisic M, Towards Chamber Specific Heart-on-a-Chip for Drug Testing Applications, Advanced Drug Delivery Reviews, 2020, https://doi.org/10.1016/j.addr.2019.12.002.
  3. Davenport Huyer L, Bannerman D, Wang Y, Savoji H, Knee-Walden E, Brissenden A, Yee B, Shoaib M, Bobicki E, Amsden BG, Radisic M, One-Pot Synthesis of Unsaturated Polyester Bio-Elastomer with Controllable Material Curing for Microscale Designs, Advanced Healthcare Materials, 2019, 8 (16), 1900245.
  4. Savoji H,Mohammadi MH, Rafatian N, Khaksar Toroghi M, Wang E, Zhao Y, Korolj A, Ahadian S, Radisic M, Cardiovascular Disease Models: A Game Changing Paradigm for Drug Discovery, Biomaterials, 2019, 198, 3-26.
  5. Savoji H,Godau B, Sheikh Hassani M, Akbari M, Skin Tissue Substitutes and Biomaterial Risk Assessment and Testing, Frontiers in Bioengineering and Biotechnology, 2018, 6, 86.
  6. Ahadian S, Savoji H, Khademhosseini A, Recent Advances on Regenerative Hydrogels in Tissue Engineering, Chemical Engineering Progress, AIChE Journal, 2018, 114 (5), 56-63.
  7. Savoji H, Maire M, Lequoy P, Liberelle B, De Crescenzo G, Ajji A, Wertheimer MR, Lerouge S, Combining Electrospun Fiber Mats and Bioactive Coatings for Vascular Graft Prostheses, Biomacromolecules, 2017, 18, 303−310.
  8. Lequoy P, Savoji H,Saoudi B, Bertrand-Grenier A, Wertheimer MR, De Crescenzo G, Soulez G, Lerouge S, In Vitro and In Vivo Evaluation of a Bioactive Coating for Stent-Grafts Based on Chondroitin Sulfate and Epidermal Growth Factor, Journal of Vascular and Interventional Radiology, 2016, 27 (5), 753-760 e3.
  9. Savoji H,Lerouge S, Ajji A, Wertheimer MR, Plasma-Etching for Controlled Modification of Structural and Mechanical Properties of Electrospun PET Scaffolds, Plasma Processes and Polymers, 2015, 12, 314–327.
  10. Lerouge S, Barrette J, Ruiz JC, Sbai M, Savoji H, Saoudi B, Gauthier M, Wertheimer MR, Nitrogen-Rich Plasma Polymer Coatings for Biomedical Applications: Stability, Mechanical Properties and Adhesion Under Dry and Wet Conditions, Plasma Processes and Polymers, 2015, 12, 882–895.
  11. Savoji H,Hadjizadeh A, Maire M, Ajji A, Wertheimer MR, Lerouge S, Electrospun Nanofiber Scaffolds and Plasma Polymerization: A Promising Combination Towards Complete, Stable Endothelial Lining for Vascular Grafts, Macromolecular Bioscience, 2014, 14, 1084–1095. 

Communications

  • Savoji H, Davenport Huyer L, Mohammadi MH, Lai BFL, Bannerman D, Shoaib M, Bobicki E, Radisic M, 3D Printing of Microvasculature Using BioelastomerPrepolymers by Freeform Reversible Embedding, 35th Annual Meeting of the Canadian Biomaterials Society, May 2019, Quebec City, Canada (Oral Presentation).
  • Savoji H, Mohammadi MH, Kim L, Ahadian S, Rafatian N, Ebrahimi Warkiani M, Radisic M, Label‐Free, High‐Throughput Purification of Human Induced Pluripotent Stem Cells-Derived Cardiomyocyte Using Spiral Microfluidic Separation, 34th Annual Meeting of Canadian Biomaterials Society, May 2018, Victoria, Canada (Poster Presentation).
  • Mohammadi MH, Savoji H, Mandla S, Ahadian S, Radisic M, Development of Functional Heart Ventricle Using hiPSC-Derived Cardiomyocytes,12th Ontario-on-a-Chip Symposium, May 2017, Toronto, Canada (Oral Presentation).
  • Savoji H, Maire M, Lequoy P, Liberelle B, De Crescenzo G, Wertheimer MR, Ajji A, Lerouge S, Chondroitin Sulfate-Oriented Epidermal Growth Factor (EGF) Coating for Random and Aligned Electrospun Vascular Grafts, 10th World Biomaterials Congress, May 2016, Montreal, Canada (Poster Presentation).
  • Hadjizadeh A, Savoji H, Ajji A, Growth Factor Releasing Micro Strands Promoted In Vitro Angiogenesis, 10th World Biomaterials Congress, May 2016, Montreal, Canada (Oral Presentation). 

Disciplines

  • Biomedical Engineering
  • Biomedical Sciences

Areas of expertise

  • Structural Tissue Engineering / Biomaterials
  • Biomedical Technologies
  • Biotechnology